ROOT Samsung Galaxy S Running XXJVR Gingerbread

Instruction to root Samsung Galaxy S Running XXJVR Gingerbread

1. Download ODIN for Galaxy S
2. Download rooting file from here
3. After extracting rooting archive you will get “CF-Root-XX_OXA_JVR-v4.1-CWM3RFS.tar” , dont extract this .tar file further and save on easy to find place like desktop
4. Switch off your phone and wait a while to complete switch off
5. Now boot it in download mode via pressing and holding VOLUME DOWN and MIDDLE KEY and while holding both press and holdPOWER KEY until it boots in download mode
6. Now you can run ODIN downloaded in first step, right click on “I9003_Odin3 v1.82.exe” and run it as administrator
7. Make sure Samsung KIES , antivirus and firewall in computer are disabled
8. Now you can connect your phone to pc using usb cable
9. Just after connecting you will see first box from left will turn yellow and it shows “added!” in odin’s message box. This indicates that phone connected successfully
10. If you are unable to connect phone to pc ,try once again . dont proceed without 9 step
11. Go to ODIN and click on PDA tab choose “CF-Root-XX_OXA_JVR-v4.1-CWM3RFS.tar” 
12. Make sure Re-Partition check box is un-ticked. and Leave Auto Reboot and F. Reset Time checkboxes ticked.
    
13. Double check all things you have done in previous steps , because now we are going to start flashing file and if something is wrong then you will have a nice brick
14. Hit the START button on odin
15. Now it will start rooting process , please wait several seconds . during this process don’t disconnect your phone & don’t close ODIN otherwise it will brick your phone.
16. After rooting completes your phone will restart automatically
17. Congratulation your Galaxy S rooted successfully and now you can disconnect your phone